Overview - 433 MHz Active RFID Reader with USB
The Reader interface to the personal computer via a standard USB cable (incorporated into the reader). One of the features of this reader is that it operates on a plug and play basis due to the USB standard it complies to.
The reader works in conjunction with the Wavetrend Active RFID Tags. The enclosure was designed in such a way that it enhances the esthetical value of that individual’s desk.
The user is able to select only one tag via software and monitor that specific tag, or monitor a few tags, which was selected by the user at installation.
Features - 433 MHz Active RFID Reader with USB
- The reader gain can be adjusted from high to low gain mode dynamically via software.
- The reader is completely plug and play.
- The reader complies with all the USB 1.1 standards. Meaning it can interface to any USB hub etc.
- In stand-alone mode the RSSI setting can be set dynamically via software. Which controls the read-range of the reader.
- The user receives a working DLL to interface to the reader. This then simplifies interfacing on software level to hardware, which makes the reader very transparent.
Specifications - 433 MHz Active RFID Reader with USB
Operational temperature | - 10º C to 60º C |
Storage temperature | - 20º C to 70º C |
Size | 81 mm x 57 mm x 20 mm (Oval Enclosure) |
Weight | Approx. 72 gms |
Colour | Ice Blue (Clariant 04-600 1%) |
Type of material | Fire resistant ABS |
Frequency | 433 Mhz |
Typical Reception Range | 8 Meters (24 feet) |
